Selecting The Right Tripod For Me
First and foremost if you have any further questions please don't hesitate to reach out to us via email or phone call we generally respond very quickly.
V2 Series : These tripods came about with customers wanting a smaller more compact tripod. With this series it only accepts 3/8 style heads such as a ballhead screw on leveling head or any other head with a 3/8 female thread
NON V2 Series: These tripods have the capability of a 75mm removable center section. With this tripod you can run ant 75mm insertable head or a 3/8 screw on style head such as a ballhead or screw on leveling head. (excluding the Kit tripod)
Tripod Series
QDT Series: Featuring a 39 inch collapsed length and 65.5 inches extended this tripod is the ultimate in stability. 1 twist lock 2 section.
Recon Series: Featuring 30 inches - 27 inches in a collapsed length and 65.5 inches extended 2 twist lock 3 section.
No Name Series: Featuring 23 inch collapsed length and 65.5 inches extended 3 twist lock 4 sections
Kit Series : Featuring a 23 inch collapsed length and extended length ranging from 80 inches to 65.5 inches 3 twist lock 4 section
Voyager Series: Featuring 19 inch collapsed length and 49.5 extended 3 twist lock 4 section
Infil Series : Featuring 14 inch collapsed length and 39.5 extended 3 twist locks 4 section
Tripod Main Tube Diameter: While tripod main tube size isn't the only makeup for stability each series has a different main tube diameter which will change weights and stability. Generally speaking increasing the main tube diameter will increase the weight along with the tripod.
QDT Series: 42MM Main Tube
Recon Series: 38MM Main Tube
No Name Series: 38MM Main Tube
Kit Series: 30MM Main Tube
Voyager Series: 28MM Maint Tube
Infil Series: 28MM Main Tube
Inverted VS Non Inverted : Inverted simply means the tripod twist locks are located at the top of the tripod vs at the bottom when in collapsed form. The benefits of the inverted system makes the tripod far easier to adjust on the fly as well as when the tripod is under load. This system comes all to user preference. With the inverted system you WILL not be able to use any leg wraps or caddies with your tripod.
Ballheads
we offer a few different options for mounting to your tripod. We will cover some options below
55MM Ballhead: Recommended for 12lbs and over
44MM Ballhead: Recommended for 12lbs and under
Every Ballhead will be the same head the only change will be the clamps.
Arcalock Dual Clamp: Pic/Arca Capable with a flip lever
Arcalock QD: Arca Swiss Top with a flip lever
Arca: Standard arca clamp with a twist knob